What conditions should be met for the use of integrated transfer machine? from as7abecom's blog

The bed of the integrated transfer machine is a right triangle, and the plane where the two guides are located intersects with the ground plane to form an inclined plane, and the Angle is 30°, 45°, 60°, 75°. The X-direction drag plate of the inclined bed is longer than that of the flat bed, and the practical significance of the application in the lathe is that more tool numbers can be arranged. The cross-sectional area of the inclined bed lathe is larger than that of the flat bed of the same specification, that is, the bending and torsional resistance is stronger.

Inclined bed lathe is mainly used for the internal and external cylindrical surface of shaft parts or disk parts, the internal and external conical surface of any cone Angle, complex rotary internal and external surfaces and cylindrical, taper threads, etc., and can be used for grooving, drilling, reaming, reaming and boring.

integrated transfer machine is a commonly used equipment in workpiece processing, with high working efficiency and good quality, so there are many users, but the following conditions should be paid attention to when using:

1. Environmental aspects:

The position of the CNC lathe should be away from the vibration source, prevent direct sunlight and thermal radiation, and prevent the machine from being affected by wet air flow. For the position where there is a vibration source nearby, the manufacturer can set up anti-vibration trenches around the machine tool.

2. Power supply:

Because the temperature of most processing workshops changes greatly, the use conditions are poor, and there are many kinds of mechanical and electrical equipment, resulting in large fluctuations in the power grid. Therefore, the position of the installation of the inclined bed lathe should be strictly controlled to ensure that the voltage fluctuation of the power supply is within the allowable range and remains relatively stable.

3, temperature conditions:

The ambient temperature used is less than 30℃, and the relative temperature is less than 80%. There are exhaust fans or chiller inside the CNC electric control box, which can keep the temperature of the electronic components constant or small temperature difference, too high temperature will lead to reduced life of the control components and more failures, but also easy to bow | short circuit problem, so the processing should be strictly controlled.

When integrated transfer machine processing, it should also be away from the occasion of liquid splashing, after all, such a humidity environment is smaller. It will also be better for the quality of processing and surface workmanship.

In short, strictly to master the technical details and requirements, in order to be able to have a significant improvement in the quality of processing, has been affirmed by customers, the quality of processed products will be more good!

integrated transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html


Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment