Original title: Management Specification for 5S Fixed Identification of Tools in
Factory Workshop Source: Internet 1. Purpose Through 5S activities on tools and
toolboxes, redundant tools and sundries are removed, and fixed and visual
management is carried out, which is conducive to improving the site, eliminating
potential safety hazards, improving production efficiency, promoting TPM of
tools,
custom
tailor tape, ensuring quality and reducing costs. (Click to register:) 2.
Style The tools on the production site shall not be mixed with any materials.
One of the following methods shall be reasonably selected for positioning
according to the actual situation: 1) bracket positioning Make the bracket (in
the shape of iron ring, iron cylinder, iron hook,
personalized tape measure, etc.) and
mark the name and specification of the tool with a label beside it, as shown in
the following figure: Expand the full text 2) Worktable positioning Make a
corresponding partition for each tool on the workbench, or make a partitioned
tool tray beside the workbench for positioning, and indicate the name and
specification of the tool with a label beside it, as shown in the following
figure (click to register:): 3) Positioning of projection plate The yellow
projection of the manufacturing tool shall be fixed; for the occasion where it
is inconvenient to make the yellow projection, the scriber shall be used to make
the projection of the tool,
tailor
measure tape ,
bespoken
tape measure, or the yellow instant sticker with a width of 10mm shall be
used to fix the outline of the object, and the name and specification of the
tool shall be indicated with a label beside it, as shown in the following
figure: 4) Tool box positioning Make a corresponding partition for each tool in
the tool box for positioning, and paste the positioning diagram of the tools in
the tool box outside the tool box, as shown in the following figure: 5) Tool
rack positioning Labels shall be established for the tool rack to identify the
number of the tool rack, the person in charge and the number of layers to be
used, and labels shall be used to identify the name, specification and quantity
of the tools in each layer. The tools in the rack shall be positioned as
required, as shown in the following figure: 6) Toolbox positioning The toolbox
is required to establish a location drawing outside the box, identifying the
toolbox number, the person in charge and the location, name and quantity of the
built-in tools; it is required to establish a location drawing or list inside
the box, identifying the location, name and quantity of the built-in tools in
the location drawing, and specifying the name, specification and quantity of
each layer of tools in the list. The tools in the box should be positioned as
required, as shown in the following figure (click to register:). 3 Numbering
regulations for tool box and tool rack Toolbox and tool rack are numbered by
each area, such as "GA01". Through the 5S improvement activities of tools and
toolboxes, we not only reduce the search waste in our work,
large
print tape measure, but also greatly improve our work efficiency. The effect
of the improvement of tool cabinets is clear and obvious. There are still five
days to go before the activity. Hurry to sign up for our "" and show our own
high-value tool cabinets, so that more enterprises and factories can learn from
it and improve.. Walk into GAC TOYOTA and see their lean management: Walk into
SAIC Volkswagen and see their lean management: New book recommendation: Friends'
Association Activities: Committed to the popularization and application of lean
management in hospitals Making Lean Popular in Hospitals Poke it before you
leave, leave your precious handprint and return to Sohu to see more Responsible
Editor:.
tape-measure.com